Monthly Archives: March 2021

Announcing the New AyrMesh Hub2x2C

AyrMesh Hub2x2C

We are very proud to announce a new product – the AyrMesh Hub2x2C.

The Hub2x2C is something of a departure for us – a more compact, slightly lower-power Hub with lower-gain antennas, built not for absolute maximum range but to provide continuous WiFi for smaller to medium-sized rural operations.

The AyrMesh Hub2x2C is a response to a problem we have been seeing from our customers: the ability to put Hubs 2.5 miles apart is great for covering a lot of acreage, but the “normal” Hubs don’t work well if they are LESS than 1 mile apart – they overpower each other. However, at 1 mile or more apart, the Hubs are really providing “pools” of WiFi around them, because lower-power devices may only have a usable range of a few hundred yards. There are frequently areas between the Hubs that are, effectively, uncovered for a lower-power device.

The new AyrMesh Hub2x2C can be placed half a mile apart, meaning that even a device with a maximum range of 400 yards can have continuous coverage, passing cleanly from one Hub to the next at the extent of its range.

When we first developed the AyrMesh Hubs, the predominant WiFi device was a large, sturdy laptop, with a “normal” strength WiFi radio and fairly large (although hidden) WiFi antennas. We were actually surprised at how far the Hubs allowed a device like this to communicate – typically half a mile, sometimes further.

As WiFi cameras came out, they used similar WiFi adapters as laptops and generally had similar range. Many had (and still have) removable external antennas that can be replaced with higher-gain antennas to even longer range.

However, now the predominant WiFi device is the smartphone, which uses a lower-power WiFi radio to save battery power, and has smaller antennas to minimize their size. And, on top of that, we’re seeing a new generation of “truly wireless” cameras run off batteries – again, using lower-power WiFi radios and frequently without an option for a higher-gain antenna. While a standard laptop might be able to use the Hub from half a mile or more away, these low-power devices will typically only have about half that range – 400 yards or so.

In the fields of a large farm, the problem of limited WiFi range is solved by use of the AyrMesh Cab Hub2 – the Cab Hub2 is easily fitted to tractors, combines, sprayers, pickups – even utility vehicles – to keep the vehicle and occupants in touch with the stationary Hubs.

On smaller farms and rural businesses, however, workers are frequently on foot, so the Cab Hub is not very practical.

The new AyrMesh Hub2x2C Hubs can be placed as close as 800 yards apart (even closer in some instances – we can reduce the transmit power) to completely cover an area in WiFi. Note, however, that they can still be positioned up to 2 miles apart (with reduced bandwidth), and you can still put up to three “circles” of Hubs around the Gateway Hub. So the new Hub2x2C can still be used to “light up” thousands of acres.

One question that has come up is the range from the new Hub to “ordinary” WiFi devices – the answer is that, at least in our testing, it is unchanged relative to the “big” Hubs. The range to phones, tablets, laptops, etc. is primarily determined by the transmit power and antenna quality of the device, not the Hub – we actually found no measurable difference between the performance of the Hub2x2C and the Hub2x2 and Hub2T for WiFi – the only real difference is in meshing with other Hubs.

Please have a look at the new Hub2x2C – it’s a great option for most rural WiFi users!