Tag Archives: ayrmesh

AyrMesh for Precision Ag – collecting precision data from cab monitors

Tractor cab

Lots of data here…

Both of the founders of Ayrstone Productivity have backgrounds in precision agriculture, and one of the motivations we had in starting Ayrstone was to help growers access and use the data generated by all those in-cab monitors by giving them a way to capture all that data wirelessly. The information on those computers is a potential goldmine if you can use it quickly and easily to make smarter decisions about your operation.

When we were doing research about data collection, however, we learned that the vast majority of growers just left the CF cards in the cab monitors all season, because it was just too much bother to pull out the card, bring it in, out it on the computer, dump the data, store it (so you can find it again), and then remember to take it back out and put it back in the monitor before you go out to work again. Some vendors were starting to put cellular modems into their cab computers, but they are expensive in the first place and carry a pretty hefty monthly service fee with them. Furthermore, there are pretty substantial chunks of rural America without good cellular data service (which is usually separate from the voice service signal).

We proposed that a mesh WiFi network (like the AyrMesh network) could be a much more effective way to collect that data so it can be used for decision support. It can be extended wherever it needs to go for data collection, it doesn’t carry a monthly charge, and a WiFi adapter, even a high-power outdoor one, is much less expensive than a cellular modem.

Adam Gittins of HTSag has an interesting and thought-provoking blog post about collecting harvest data off his AgLeader console with the new AgFinity WiFi adapter. He is even able to see his harvest results when he’s not on the combine!

Thank you to Adam Gittins for this image

Great post on “Precision Ag Explained”

Not really Adam – just a picture I thought was funny.

Adam Gittins of HTS Ag got an AyrMesh Hub2n a few weeks back, and he has published a great post about it on the outstanding blog “Precision Ag Explained.” The post helps explain how Wireless Farm Networking is going to drive better and more efficient farm operations in his view.

Here’s hoping we can see a lot more from him in the future – we really appreciate having someone of his experience and expertise writing about Ayrstone.

New Ayrstone Product: the AyrMesh Receiver

Today we’re announcing a new product in the Ayrstone AyrMesh line: the AyrMesh Receiver.

The AyrMesh Receiver is actually, of course, more than a receiver – it transmits and receives data – but it is designed as a simple, low-cost way to put one or more “wired” (Ethernet) devices onto an AyrMesh network. It is very similar to our AyrMesh Hub, but with a couple of important differences:

  1. The AyrMesh Receiver connects to the Hub’s WiFi signal, not the wireless mesh signal.
  2. The AyrMesh Receiver does not create its own WiFi access point – it is a client device only
  3. The AyrMesh Receiver uses a directional antenna for maximum range – it can be positioned up to 2 miles away from an AyrMesh Hub (optimal conditions).

Typical uses for the AyrMesh Receiver include:

  1. Using high-end IP cameras or other network devices that do not have WiFi
  2. Bringing the AyrMesh network inside of metal buildings – an AyrMesh Receiver can be placed on the outside of the building and devices inside can be connected to the LAN port of the receiver. You can even put a WiFi access point inside the building so you have WiFi indoors as well as outdoors.
  3. Connecting devices like network-enabled weather stations in more distant fields – since the AyrMesh Receiver can be up to 2 miles from your furthest Hub, you can now include areas in your network that were previously unreachable.

The AyrMesh Receiver is available now from Ayrstone – please see our website for details.

Welcome to the Ayrstone Blog!

This is me, but I’ll probably never look this good again.

This is what it’s about: Ayrstone on the farm. This is Matt Hughes’s farm in IL

This is a blog about Ayrstone, our products, networking, particularly wireless networking, the internet, farm/ranch management, and whatever else we find interesting. The primary author is Bill Moffitt, President and Chief technical guy for Ayrstone Productivity.

As Ayrstone customers who have spoken to me can attest, my interests are many and varied, but they always circle back to ways to get things done better, cheaper, safer, and more effectively. I am a strong proponent of technology, but I’m not really what you might call an “enthusiast.” I think of myself more as a crash-test dummy: I want to try new things, see what the potential is, and then talk about what I find (good or bad). The nice thing about this is, I hope, I can find things that are genuinely helpful. The bad part, of course, is that you may not always agree with my assessment. But, of course, that’s what makes this interesting: I expect some lively comments and discussions about the relative merits of different approaches here.

Just so you know what to expect, I’m a “machine gun” writer: I’ll go a long time without writing anything, and then I’ll put up several posts in rapid succession.

I welcome your comments, both positive and negative. This world of networking on the farm has a lot of big, new opportunities, and I hope I can help you make the most of it.

If so, I’ll have done my job.