Monthly Archives: January 2020

It’s Back! Part 2 – The AyrMesh Hub2x2

After over a year, we are happy to announce the new version of the AyrMesh Hub2x2! The new Hub2x2, just like the older model, offers twice the bandwidth (speed) of the single-antenna Hub2T and Hub2n. However, this new model offers more transmit power along with high-gain antennas for maximum range – the same as the Hub2T.

This new model of the Hub2x2 has the antenna jacks solidly molded into the case for maximum durability, with durable, high-gain antennae very similar to the antenna on the Hub2T.

We strongly recommend the Hub2x2 as your “Gateway Hub” – the Hub connected to your Router as the origin of your AyrMesh network; for Remote Hubs we now offer either the Hub2x2 or the Hub2T.

In our testing, we have found that the new Hub2x2 delivers up to 65 Mbps to a 2×2 client (as tested with a Samsung Galaxy S10), and over 30 Mbps as a Remote Hub 2 miles from a Hub2x2 Gateway Hub, so it’s much more capable as a Remote Hub than the older Hub2x2 model – faster than the Hub2T.

The one big difference between the Hub2x2 and the Hub2T is in the amount of power needed – the Hub2T requires only about 4.5 Watts, but the Hub2x2 needs about 8 Watts. For this reason, we continue to suggest the use of the Hub2T in cases where power is an issue, like a “field Hub” powered by a solar-panel battery pack.

The new Hub2x2 is available right now in the Ayrstone store – please check it out today and let us know what you think!

P.S. the new AyrMesh Bridge was part 1, this is part 2… stay tuned for part 3!