Tag Archives: ayrstone

Why AyrMesh.com?

Leave a reply

This is one of the questions we get in Ayrstone support from time to time: why do I HAVE to use AyrMesh.com? Why isn’t there just a setup menu on the device?

My answer is simple: if you’re using a single Hub, then it doesn’t much matter:  you have to set the configuration on the device or you have to set the configuration on AyrMesh.com. About the same amount of effort.

But, if you’re using more than one AyrMesh device – Hubs or Receivers – on your network, using AyrMesh.com saves you time, because all your devices automatically configure themselves from AyrMesh.com. Furthermore, because they check into AyrMesh.com every few minutes, you can always check there to make sure your AyrMesh devices are working properly.

Our entire goal in creating the AyrMesh System was to make it so easy that anyone could set it up and use it, and you’d spend as little time as possible fiddling with your network and as much time as possible enjoying its benefits. AyrMesh.com is an important part of that value

Great post on “Precision Ag Explained”

Leave a reply

Not really Adam – just a picture I thought was funny.

Adam Gittins of HTS Ag got an AyrMesh Hub2n a few weeks back, and he has published a great post about it on the outstanding blog “Precision Ag Explained.” The post helps explain how Wireless Farm Networking is going to drive better and more efficient farm operations in his view.

Here’s hoping we can see a lot more from him in the future – we really appreciate having someone of his experience and expertise writing about Ayrstone.

New Ayrstone Product: the AyrMesh Receiver

Leave a reply

Today we’re announcing a new product in the Ayrstone AyrMesh line: the AyrMesh Receiver.

The AyrMesh Receiver is actually, of course, more than a receiver – it transmits and receives data – but it is designed as a simple, low-cost way to put one or more “wired” (Ethernet) devices onto an AyrMesh network. It is very similar to our AyrMesh Hub, but with a couple of important differences:

  1. The AyrMesh Receiver connects to the Hub’s WiFi signal, not the wireless mesh signal.
  2. The AyrMesh Receiver does not create its own WiFi access point – it is a client device only
  3. The AyrMesh Receiver uses a directional antenna for maximum range – it can be positioned up to 2 miles away from an AyrMesh Hub (optimal conditions).

Typical uses for the AyrMesh Receiver include:

  1. Using high-end IP cameras or other network devices that do not have WiFi
  2. Bringing the AyrMesh network inside of metal buildings – an AyrMesh Receiver can be placed on the outside of the building and devices inside can be connected to the LAN port of the receiver. You can even put a WiFi access point inside the building so you have WiFi indoors as well as outdoors.
  3. Connecting devices like network-enabled weather stations in more distant fields – since the AyrMesh Receiver can be up to 2 miles from your furthest Hub, you can now include areas in your network that were previously unreachable.

The AyrMesh Receiver is available now from Ayrstone – please see our website for details.

Welcome to the Ayrstone Blog!

Leave a reply

This is me, but I’ll probably never look this good again.

This is what it’s about: Ayrstone on the farm. This is Matt Hughes’s farm in IL

This is a blog about Ayrstone, our products, networking, particularly wireless networking, the internet, farm/ranch management, and whatever else we find interesting. The primary author is Bill Moffitt, President and Chief technical guy for Ayrstone Productivity.

As Ayrstone customers who have spoken to me can attest, my interests are many and varied, but they always circle back to ways to get things done better, cheaper, safer, and more effectively. I am a strong proponent of technology, but I’m not really what you might call an “enthusiast.” I think of myself more as a crash-test dummy: I want to try new things, see what the potential is, and then talk about what I find (good or bad). The nice thing about this is, I hope, I can find things that are genuinely helpful. The bad part, of course, is that you may not always agree with my assessment. But, of course, that’s what makes this interesting: I expect some lively comments and discussions about the relative merits of different approaches here.

Just so you know what to expect, I’m a “machine gun” writer: I’ll go a long time without writing anything, and then I’ll put up several posts in rapid succession.

I welcome your comments, both positive and negative. This world of networking on the farm has a lot of big, new opportunities, and I hope I can help you make the most of it.

If so, I’ll have done my job.