The IndoorHub is the replacement for the AyrMesh IndoorAP – it’s a tiny but powerful indoor 2×2 access point with meshing. IndoorHubs can be used to fill a large building with WiFi without having to run Ethernet cables.
The IndoorHub works just like the IndoorAP to provide indoor WiFi in conjunction with the AyrMesh outdoor products. However, there are some significant improvements over the IndoorAP:
- 2×2 MIMO on the IndoorHub vs. 1×1 on the IndoorAP – higher speed, better coverage
- Meshing – use additional IndoorHubs to fill a large building or house.
- Does not use an existing AyrMesh outdoor product’s power supply – runs off USB power, comes with its own power supply.
- Can be used stand-alone (without other AyrMesh products) by just plugging into a router. For instance, you can use one or more IndoorAP in a large house or outbuilding with its own Internet connection.
The Hub2 and the IndoorHub
The AyrMesh IndoorHub uses the same KIND of meshing as the Hub2 products, but it offsets itself from the Hub’s channel in order to keep from interfering with Hub2 units. It also uses a different SSID (with “-IndoorAP” appended to the end) to reduce confusion. It normally connects to the LAN port of an AyrMesh Hub, Receiver, or Bridge radio, but it can also be uses with any Internet-connected router – for instance, to spread WiFi throughout a large house or a separately-connected outbuilding.
The IndoorHub is available today from the Ayrstone Store. The IndoorHub is priced at $149.95, but, for a limited time, we are selling it for $99.95 – the same price as the IndoorAP.